Bradley has a century plus home in Hamilton that needed some floor support. Omni Basement Systems installed the SmartJack system that includes a large concrete footing and a supplemental beam. The SmartJack and the Supplemental Beam are fully galvanized so they won’t rust. 

Michelle is one of original customers of Omni Basement Systems. Her house is on a property that the backyard slopes toward the wall and it is causing it to bow, 
Omni stabilizied the block foundation wall by adding Carbon Armor. Carbon Armor is 7″ wide strips of Carbon Fiber that is adhered tot eh wall by epoxy. THe top of the all is also achored tot he rim joist using AmorLocks. 

Nancy’s house in Hamilton has a crawlspace. After years of damp air. the floor has started to sag. Omni Basement Systems added floor support by installing SmartJacks and Supplemental beam from Supportworks. 

Tristen in Hamilton, On had a crawlspace with lots of moisture issues. The joists were sagging and there was mold growing on them. 
This was caused by a bare dirt crawlspace floor that was constantly releasing moisture into the air envelope of the crawlspace. Old way of thinking was to to simply vent the crawlspace to “air it out”. After years and tears of studies, this was found to be untrue. The best way to prevent the moisture is to seal the ground from the air envelope. Make this space a part of the home.  Now the air can be dehumidified and storage space can be gained. Because of the damage that was already done to the floor joists above, a Supplemental Beam and SmartJacks from Supportworks were installed. Voila, the crawlspace has been transformed. 

 Barry has a house in Hamilton, On where the main beam was sagging. It had house jacks’ installed already but they were not strong enough to do the job. Omni Basement Systems installed the SmartJacks by Supportworks.  The SmartJacks are fully galvanized so they won’t rust. They are supported by an engineered footing so they are designed to support 30,000lbs each. 

When our Caledonia, ON homeowner noticed their wall was not only bowing but also leaking, they knew it was time to call in help. That’s when we stepped in. As you can see in the before picture, the wall’s condition significantly compromised the home’s integrity. Enter our solution: the PowerBrace and Carbon Armor systems, tailor-made for enduring strength and leak resolution. The after photo speaks volumes—witness a completely stabilized and dry basement. We’re proud to have transformed this space, ensuring our customer’s peace of mind and offering a durable solution in line with our mission for remarkable, enduring home service.

Chris has a home in Caledonia, ON that is settling because of poor soil conditions. Alessio along with a P.Eng designed a system usung our Push Piers from Supportworks. 
the Push piers are large brackets that are attached to the fondation and galvanized steel tubes are push through them until they reach a specified soil density that will better support the home. Once all the piers are supported properly, hydraulic jacks can lift a house back into position. In this case, it lifted the house an full inch in some areas. 
The pictures below shows the step cracks, which are tell tale signs of a settling foundation, being closed up. NO mortor was used on these cracks

 Greg has a home with a poured foundation wall that has some serious cracking. The concern is that it may be structural related. 

Omni Basement Systems used our very own Carbon Armor system from Supportworks to strengthen the wall so it will not tip in or bow. 

The Carbon Armor are 7″ wide Carbon fiber strips that are epoxied to the wall. Also there are carbon armor straps that lock the wall to the floor joist system via the rim joist. 

Christina has a bowing wall in her Kitchener basement. Omni Basement Systems straightened her wall over time with the Powerbrace system from Supportworks. 
The Powerbrace is a system containing of 4″ galvanized beams and brackets top and bottom the connect the beam to the footing and the floor joist system of the home. 
There is a large tension bolt that can be adjusted to straighten the wall over time. 
Under the window, Carbon fiber is adhered to give that area extra strength. 

Sara in New Hamburg has a home with a badly bowing wall. She hired Omni Basement Systems to straighten this wall and also have some waterproofing done.